Nothing quite like trees for getting us all going. For some of us the search to get the right good looking trees that fit, comes second only to that of getting the perfect rule set.
I've made a few over the years as I have failed to see how some of the offerings we used to get were at all compatible with 28 mm figures.
After all trees aren't two or three times bigger, they soar above us and nothings looks dafter than four inch trees (100 mm) alongside twelve inch buildings (300 mm).
So much so that in 28 mm you will rarely see trees and building on the same table.
I was playing around with the idea of doing something different rather than a bristle brush offering and came up with this.
Two 28 mm LOTR figures are on the base and you can see the size. However I'm still not happy as I feel the trunk should be twice the size, so the model can hide behind it, but it's close.
In the second photo the same tree, revamped this year, some 8 years later and it begins to look like my objective. This is from a
The trunk is still too narrow as I revamped the foliage rather than the trunk.
For those interested in construction.
Get some lengths of wire and twist them together.
I believe I started with six, twisting them from about two inches, using a vice and pliers. Where I wanted the first branch I separated out one piece of wire and twisted the remaining five strands, repeat for second and third, e.t.c., until you have two strands left. Normally you cut all the strands off at the point you want a branch to stop especially if you are doing a dead tree.(longer at the bottom, shorter at the top),
This time I made a giant loop of each strand.
The base of the wire strands were then splayed out to allow the tree to stand, whilst I left them at about two to three inches you can leave them longer and twist them to look like roots. I decided to 'glue' this to an old CD, windows 95 OS I believe, maybe I should have used an old 'Evergreens' cd.
I glued it using the same brown mastic that you might use on dark brown hardwood as it would save me painting it later. When set I then applied additional mastic to the trunk of the tree and branches smoothing up and down the trunk and along the branches to get a bark effect.
[NOTE, keep a small pot of water nearby and wet your fingers as you 'sculpt' the mastic this will stop it sticking to your fingers, also ensure you have tissues to wipe your fingers on after you are done in order to keep your partner happy.]
You can thicken the mastic up as mush as you want, either by wrapping string around the trunk first or by applying more mastic when the first is dry. A happy side effect is that when dry you can bend the branches or trunk to any shape you want as demonstrated by these two photos.
I then got some wire wool and partially threaded the loop through this gluing it in place and roughly positioning the branches horizontally. Lots more glue was the sprayed over the wire wool both on top and below the branches and then I drenched it with flock.
When I revisited the project I added more, better quality flock to top and underneath of branches, let it dry and sprayed and flocked again.
I then applied a sand/pva paste to the CD and when dry, dry brushed before flocking.
[Today I'd use brown wood filler].
I think the tree looks right with the buildings.
Of course today you can get excellent trees from 4ground, but at £24 for three trees?
So DIY still appeals to me as I can get the height I want too..
But 4grounds offerings are stunning.
If you want to see my take on a Si-Fi then look here Alien Trees 28 mm.